Machine Tools Accessories

• Precision Ground internally and externally.
• Made of high quality tool steel.

• Machined from High grade steel with tool blocks hardened and ground.
• Ideal for mill or Jig bore operations.
• Non-Reflecting Satin Chrome Body allows easy reading and adjustment.
• Threaded back for interchangeable Shanks.

• 60° included Point angle full lathe center.
• Precision ground and Hardened.
• Carbide tipped centers gives longer tool life and offer more wear resistance in both turning or grinding applications thus reducing costs.

Specifications:

• 60° Included Point Angle Half Center.
• Precision ground and Hardened.

• Made of Hardened and Ground high Carbon Steel.
• Hardness 55 to 62 HRC.
• Consists of two 'anti-friction' Bearings.
• Single Row Deep groove ball bearing and Taper Roller bearing to absorb combined radial and thrust loads.
• Maximum speed capacity upto 2000 RPM

• Consists of Three anti-friction Steel bearings Lubricated and Protected against contaminants and coolants.
• Two deep groove ball bearing and one Taper Roller bearing for combined loads.
• Hardened and Ground (60-62 HRC) Steel with 60° tip angle.
• Knurled body for a firm grip.
• Run out within .0002" (.005 mm).
• Bearings are Pre-loaded and pressed to avoid starting loads.

Specifications:

• Features Hardened and Tempered Jaws
• Clamps equipped with spring screw clip.
• Highly useful for holding small work together,when drilling, welding, assembling, etc.

• Hardened and Tempered.
• Black Finish.

Specifications:

• Ideal Machine for shearing sheet, steel, bars and rods.
• Hardened and Tempered replaceable blades.
• Long handles provides plenty of shearing torque.
• Comes with predrilled holes to bolt down to work bench.
• Spare blades are also available.
• Available in lever type and Gear Type.

• Horizontal and Vertical Rotary Tables with 360° graduations.
• Features dual Positive action locks with extra deep coolant channel.
• Table clamping surface are precision ground and cylindrical center bore concentric
• Gear ratio is 90 : 1 and dial graduations give 10 second vernier reading.

Specifications:

• Hardened A Grade Type - Acc DIN 2185 is made from external and Internal Ground Carbon Steel.
• Workshop grade is made from external Ground and Internal reamed Carbon Steel.

• Designed to hold pipe and hollow work.
• Preloaded bearings to achieve good thrust and radial Capacities.
• Head made from Heat treated hardened high Carbon Alloy steel

• For use on Hard Surfaces

• 6 (150 mm) Long, Provided with Clip

• Precision Ground to Master Gauges.
• Made of high quality tool steel.
• Guaranteed finest Possible accuracy and fit.
• Individually Packed.

• Precision Ground
• Guaranteed Finest Possible accuracy and fit.
• Individually packed

Specifications:

• Integrated Shank for maximum rigidity.
• Hardened and Ground body.
• Black oxidised finish.
• Cross and Vertical Hole dia 1/2" .
• Offset travel 3/4".

Specifications:

• Smooth Ratcheting action.
• Can be used for curved, straight & internal angle cutting.
• Super hardened edge on bottom wheel.
• Base mountable on work bench.

• Manufactured from high Grade Iron.
• Provided with Square Head Screw.
• Available in both straight and Bent Styles.
• Sizes above and including 4" are fitted with two screws instead of one

• Carriers for Grinding Machines and light Lathes.
• Made of malleable Iron.
• Shiny black finish.

Specifications:

• Made of Heavy Cast Steel.
• Adjustable Screw and tilting Swivel head.
• Has One inch (25 mm) adjustment.
• A shop tool with hundreds of uses.

• Widely used product.
• Every Machine and Machinist needs one.
• 5-1/8" (130 mm) long and 1-1/4" (32 mm) wide.
• Black Shiny Finish.

• Handy tool for Inside, Outside and depth measurement.

• Columbus Type features Thumb controlled movement with locking device.

• Precision Type features a Thumb controlled ball movement and is Nickel Plated.

• Graduated in both mm and Inch size.